VIPA CP 341S, Manual

Page: 31 / 70

Manual VIPA System 300S SPEED7
Chapter 3 Hardware description
HB140E - CP - RE_341-2CH71 - Rev. 09/46 3-3
Structure
[1] LED status indicators
The following components are under the
front flap
SF
S/F1
S/F2
S/F3
S/F4
S/F5
S/F6
S/F7
S/F8
VIPA 331-7KF00
AI 8x12Bit
X 2
3 4
SM331
VIPA 341-2CH71
CP341S-2RS422/485
X 2
3 4
RUN
INTF
EXTF1
FAULT1
TxD1
RxD1
EXTF2
FAULT2
TxD2
RxD2
COM1
COM2
COM2
1
2
COM1
X2
X3
3
[2]
[3] RS422/485 COM1 interface
RS422/485 COM2 interface
The communication processor is provided with LEDs for the purpose of
displaying the operating status. The following table shows the description
and the color of these LEDs.
Name Color Description
RUN green Blinks at start-up and firmware-update.
On at ready for communication
INTF red On at an internal error of the module.
If this error just exists after PowerON,
please contact the VIPA hotline.
EXTF1 red On while wire break at COM1.
FAULT1 red On if COM1 is without parameters.
Blinks if COM1 has wrong parameters.
Flickers on parity error or character frame error
at COM1.
TxD1 green On if CP is sending user data via COM1
RxD1 green On if CP is receiving user data via COM1
EXTF2 red On while wire break at COM2.
FAULT2 red On if COM2 is without parameters.
Blinks if COM2 has wrong parameters.
Flickers on parity error or character frame error
at COM2.
TxD2 green On if CP is sending user data via COM2.
RxD2 green On if CP is receiving user data via COM2.
CP 341S-2RS422/485
341-2CH71
LEDs