Chapter 4 Deployment
Manual VIPA System 300S SPEED7
4-12
HB140E - CP - RE_341-2CH71 - Rev. 09/46
The
DONE
output shows ”request completed without errors”. If there was
an
ERROR
, the corresponding event number is displayed in the
STATUS
.
If no error occurs the value of
STATUS
is "0".
DONE
and
ERROR
/
STATUS
are also output in response to a RESET of
the FB. In the event of an error, the binary result BR is reset. If the block is
terminated without errors, the binary result has the status ”1”.
Please regard the parameter
DONE
,
ERROR
and
STATUS
are only
available at one block call. For further evaluation these should be copied to
a free data area.
With
LADDR
the address of the corresponding CP is specified. This is the
address, which was specified during hardware configuration by means of
the properties of the respective interface of the CP.
To access the COM2 interface you have to add 16 to the respective
address value.
Please regard for each interface of the CP one address is used for input
and output.
The FB 8 - P_SND_RK deals with an Instanz-DB I_SND_RK. The DB no. is
transmitted with the call.
It is not allowed to access the data of an instance DB.
Error indication
Addressing
Data area
Summary of Contents for CP 341S
Page 1: ...VIPA System 300S SPEED7 CP 341 2CH71 Manual HB140E_CP RE_341 2CH71 Rev 09 46 November 2009 ...
Page 4: ...Contents Manual VIPA System 300S SPEED7 ii HB140E CP RE_341 2CH71 Rev 09 46 ...
Page 8: ...Safety information Manual VIPA System 300S SPEED7 4 HB140E CP RE_341 2CH71 Rev 09 46 ...
Page 70: ...Index Manual VIPA System 300S SPEED7 A 2 HB140E CP RE_341 2CH71 Rev 09 46 M Stich ...
