VIPA CP 341S, Manual

Page: 5 / 70

Manual VIPA System 300S SPEED7
About this manual
HB140E - CP - RE_341-2CH71 - Rev. 09/46 1
About this manual
This manual describes the CP 341S with double RS422/485 interface of
the System 300S from VIPA. Here you may find every information for
commissioning and operation.
Chapter 1: Basics
This Basics contain hints for the usage and information about a SPEED7
system from VIPA.
General information about the System 300S like dimensions and
environment conditions will also be found.
Chapter 2: Assembly and installation guidelines
In this chapter you will find all information, required for the installation and
the cabling of a PLC with the components of the System 300.
Chapter 3: Hardware description
Here the hardware components of the CP 341S are more described. The
technical data are to be found at the end of the chapter.
Chapter 4: Deployment
Contents of this chapter is the hardware configuration and the
parameterization of the CP. In addition the communication between CPU
and CP 341S by means of function blocks is described.
Chapter 5: Communication protocols
In this chapter the communication protocols are described, which are
supported by the CP. Here you may find the protocol specific parameters
and if necessary the functionality of the corresponding protocol.
Chapter 6: Diagnostics and error behavior
In this chapter the possibilities of diagnostics and the error behavior of the
CP is more described. Each CP part has its own diagnostics buffer for
about 100 diagnostics entries and these are accessible as record sets.
The record set of the corresponding CP part may be accessed by means of
the SFC 59 RD_REC.
Overview