VIP Residential IP Intercom Installation Guide v1.1 - Issued January 2017
12
5.
Select “Product Info” and set the “Room No.”
(it must be at least 3 digits, such as 102, in
our example we will be using 9901) and
press “OK” to save.
6.
Select “Net Set” and change the local
IP address of this Indoor Monitor from
192.168.1.109
to
10.1.1.111
and press
“OK” to save.
7.
The other Indoor Monitor we will setup
as an “Extension” Indoor Monitor. On the
“Extension” Indoor Monitor go to “Settings”
> “Project Settings” > then enter the
password
888888
.
8.
Select “Product Info” and set the mode to
“Extension”. You can now set the Room
Number to the same as the Master Indoor
Monitor but add “ -1 “ to show that it is the
first extension (such as
9901-1
). Enter the
IP address of the “Master” Indoor Monitor
10.1.1.111
and press “OK” to save.
9.
Select “Net Set” and change the local
IP address of this Indoor Monitor from
192.168.1.109
to
10.1.1.112
and press
“OK” to save.
