VIP Residential IP Intercom Installation Guide - Issued January 2017
23
After installation is complete, you will need to set the correct time and date.
There are 2 different ways to set the time and date, you can setup features such as NTP and DST in the Door
Stations web interface, or you can adjust the time and date from the Indoor Monitor.
To set the time and date from the Door Station:
You will need a Windows computer (in the same IP address range) that can connect to the Web Interface of the
Door Station.
3. After you have made your changes, select “OK”. It
will take a few minutes before the indoor monitor
displays the new time and date.
3.4
Setting the Time and Date
To set the time and date from the Indoor Monitor:
On the Indoor Monitor go to “SETTINGS” > “Time”. In this
menu, you can adjust the date and time.
1.
Log in to the Door Station's Web Interface.
(Refer to Section 1.1.1 for how to log in.)
2. Once logged in, go to “System Config” > “Local
Config” > “System Time”. In this menu, you can
change the Time and Date format and Sync the
Door Station to your PC time.
