36
2
1
5
3
7
6
4
1
Current position marker of the camera on the axis
2
Mid-point of the axis
3
Set/Clear buttons for the positive axis end limit
4
Current positive axis end limit marker
5
Zero axis value button
6
Current Negative axis end limit marker
7
Set/Clear buttons for the negative axis end limit
Resetting the Axis Centre Point
The centre points of the camera control axes can be set at any position required.
In a typical installation, pan is set with the camera pointing at the main area of interest in
a production, and tilt set with the camera platform horizontal.
1.
Drive the camera to the desired position on the axis.
2.
Tap the
Zero
button in the appropriate axis panel.
3.
The current position marker (blue triangle) returns to the centre point and is reset to 0.00°.
Setting Axis Limit Points
The range of the camera control axes can be restricted by setting limit points. The procedure
described below is identical for all axes and positive and negative limits.
1.
Drive the camera to the desired limit position on the axis.
2.
Tap the
Set
button for the appropriate axis limit end (positive or negative).
3.
The axis end limit marker (red rectangle) moves to the new limit point and the limit position
value is displayed in degrees.
