29
Shot Preferences
Options
ON (Blue)
OFF (Black)
Take Camera
When you select a shot on
the touch-screen, the camera
preview selection on the joystick
control panel automatically
follows and the joysticks will
control the camera for the
selected shot.
The shot selection on the touch-
screen and the camera preview
selection are decoupled. So, let’s
say that one camera1 is on air and
being trimmed with the joysticks.
You can select the next shot on
camera3 and fade or cut to it while
continuing to trim camera1 with the
joysticks.
Single Selection
Allows you to select a shot on
one camera at a time and then
cut or fade to that shot. Selecting
a second shot on a different
camera automatically deselects
the first shot.
Allows you to select shots on
multiple cameras and then cut or
fade to all of the shots at the same
time.
Delete Warning
Every time you delete or
replace a shot a warning
message appears and requires
you to confirm the deletion or
replacement.
Shots will be deleted or replaced
immediately. This mode should be
used with caution, because there
is no undo feature to restore a
deleted shot.
Default Time
Allows you to enter a default time
that will be used when you store
shots (if the Require Shot Time
function is off).
Allow Deselect
When you select a shot on the
touch-screen, you can deselect
that shot by tapping it a second
time.
When you select a shot on the
touch-screen, you can only
deselect that shot by selecting a
different shot on the same camera.
Touching a selected shot a second
time has no effect.
