10
3
Adding Robotic Camera Units to the System
Configuration Management Tool
The Configuration Management Tool allows you to add any connected hardware to the μVRC
system. You can build each individual robotic camera unit by adding the hardware components
(robotic head, camera, lens, etc) fitted.
Setting up a Basic μVRC System
When the μVRC system has been powered up and the application has started, you can begin
to configure and control the connected robotic cameras. Basic configuration is described in this
chapter to get you up and running quickly.
If any addition licenses have been purchased, they should be applied to the μVRC system during
set up. For more information see
About Screen and License Management
on page 34.
•
If you are unfamiliar with the μVRC interface, see
Using the μVRC
on page 12
•
To further set up and refine the μVRC system, see
Configuration Management
on page 31
The Configuration Management Tool has built-in intelligence to identify compatible
and incompatible hardware components being added to a robotic camera unit.
From the main μVRC workspace tap the
Menu > Configuration Management
buttons to open
the Configuration Management Tool window.
1
2
3
1
Profiles List
- Available robotic heads, cameras and other components
2
Camera Storage Grid
- Cells for storing robotic camera units
3
Camera Properties
- Configuration section for robotic cameras and hardware
