25
www.vintageair.com
905644 REV A 01/10/19, PG 25 OF 33
Wiring Final Steps
1.
2.
3.
4.
Reconnect the circuit breaker, and mount it as close as possible to battery (See Photo 1, below).
Route the blue lead from the main wiring harness to the safety switch (See Photo 2, below).
Connect the compressor lead wire to the safety switch (See Photo 2, below).
Wrap the safety switch wiring with flexo sleeve, and secure it with the supplied tie wraps (See Photo 3,
below).
Mount Circuit Breaker
Close to Battery
Photo 1
Photo 2
Wrap Safety Switch
Wiring with Flexo Sleeve
Photo 3
Connect Wire Leads
to Safety Switch
Secure Wiring
with Tie Wrap
Summary of Contents for 564191
Page 33: ......
