7
www.vintageair.com
905644 REV A 01/10/19, PG 7 OF 33
Center Louver Modification
1.
2.
3.
4.
5.
6.
7.
Remove the center louver assembly from the dash (See Figure 1, below).
Locate the flange seal foam and the 1” foam piece (See Photos 1 & 2, below).
Install the flange seal foam onto the center louver assembly as shown in Photo 3, below.
Install the 1” piece of foam onto the lever side of the center louver assembly (See Photo 4, below).
Install the center louver hose adapter onto the center louver assembly (See Photo 5, below).
Using the (2) mounting holes on the bottom side of the hose adapter as a guide, drill (2) 1/8” holes into the
louver assembly (See Photo 6, below).
Secure the center louver hose adapter to the louver assembly using (2) #8 x 1/2” pan head screws (See
Photo 7, below).
Photo 2
Flange Seal Foam
Figure 1
Remove Center Louver
Assembly from Dash
1” Foam
Install Flange Seal Foam
onto Center Louver Assembly
Install 1” Piece of Foam onto Lever
Side of Center Louver Assembly
Install Center Louver Hose Adapter
onto Center Louver Assembly
Photo 1
Photo 3
Photo 6
Photo 5
Photo 4
Photo 7
Drill (2) 1/8” Holes into
Louver Assembly
Secure Hose Adapter To Louver Assembly
Using (2) #8 x 1/2” Screws
Center Louver
Hose Adapter
62614-VCE
Summary of Contents for 564191
Page 33: ......