11
www.vintageair.com
905644 REV A 01/10/19, PG 11 OF 33
Lift Door Toward
Spring to Remove
Disconnect Fresh
Air Door Cable
Fresh Air Door
Assembly
Trim Flush with Kick
Panel Housing
Fresh Air
Door Housing
Late-Model Kick Panel Modification
1.
2.
3.
4.
Remove the fresh air door assembly from the OEM kick panel by lifting up on the door toward the spring and
sliding it out of the hinge housing (See Photo 1, below).
Disconnect and remove the fresh air door cable from the OEM lever housing (discard) (See Photo 2, below).
Trim the fresh air door housing flush with the back of the OEM kick panel, and discard the excess material
(See Photo 3, below).
Cut out the kick panel vent grille (See Photos 4 & 5, below).
Cut Out Kick
Panel Vent Grille
Photo 1
Photo 2
Photo 3
Photo 4
Photo 5
Summary of Contents for 564191
Page 33: ......
