19
www.vintageair.com
905644 REV A 01/10/19, PG 19 OF 33
Photo 9
(2) 1/4-20 x 1/2”
Bolts (Supplied on
the Evaporator Unit)
7.
8.
9.
10.
11.
Locate the evaporator dash bracket (See Photo 8, below).
Install the (2) #8 U-nuts onto the bracket as shown in Photo 8, below.
Install the dash bracket onto the evaporator unit using (2) 1/4-20 x 1/2” bolts (supplied on the evaporator unit).
NOTE: Do not fully tighten the bolts at this time.
Install the glove box door using the (3) OEM screws, ensuring the screws install into the (3) #8 U-nuts on the
dash bracket (See Photo 10, below).
NOTE: The use of a mirror can be used to verify the screws are
correctly installed.
Adjust and tighten the bolts on the dash bracket as shown in Photo 9, below.
Evaporator Installation (Cont.)
Install Glove Box Door
using OEM Screws
Drain Hose Installation
1.
Install the drain hose through the previously drilled 5/8” hole in the firewall. Attach the drain hose onto the
drain outlet on the bottom of the evaporator unit (See Photo 1, below).
Photo 1
Evaporator Drain
Outlet
Attach Drain Hose
to Drain Outlet
Install Drain Hose
into 5/8” Hole
Photo 10
Evaporator Dash Bracket
640706
(2) #8 U-nuts
Photo 8
Summary of Contents for 564191
Page 33: ......
