9
Gasifying boilers VIGAS
4. VIGAS BOILER IN BASIC CONFIGURATION
(without discharge fan, gases thermometer and lambda sensor)
4.1 VIGAS BOILER OPERATING
4.1 .1 Boiler activation
4.1.2 Boiler activated – heating mode
4.1.3 Boiler activated – burning mode
4.1.4 Adding fuel, Disconnection the boiler (manually)
Using graphical control. To call the graphical control, press central button ENTER. Graphical
control offers option to switch off, adding fuel or cancel the graphical control.
If boiler is in unactive status with symbol „OFF“, as displayed on
the picture, by pressing the central button ENTER the boiler start
the operation.
Choose one option
OFF Switch-off
Add fuel
⌧
Cancel the control
bc
Change the indicated value
By pressing „
“ fan will be switched off. By using the rod open
the chimney flap, consequently open the upper door. You can add
fuel, if necessary. Close the upper door and chimney flap.
By pressing „ “ adding fuel will be stopped. Fan will be switched-
on automatically.
Boiler is set to heating mode, if temperature of outgoing water is
lower, then set shotdown temperature of the boiler. Shotdown
temeperature is in settings. Usually is set to 50
0
C. Pump is
pulse
working in dependence on temperature of the boiler water! The
pump is working, when symbol flash.
The burning mode is active after the shotdown temeprature is
time deviation. In this mode pump is working
pulse
(bolier
protection against low-temperature corrosion), 5
0
C before set
temperature constantly. The pump is working, when symbol flash.
Boiler is responsive to indoor thermostat, when indoor thermostat is
switched off boiler slowly decreasing its output.
Summary of Contents for VIGAS 100
Page 34: ...34 Gasifying boilers VIGAS ...
