Vimar ELVOX 40610.S User Manual Download Page 26

Page: 26 / 128

40610.S - SIP 7" video entryphone

5 Monitoring functions (auto-start)

The

Monitoring

icon in the Main screen is useful for watching the external panel’s camera without the need that

someone in the external panel places a call. This functionality is also called

auto-start

The

Monitoring

screen has a similar look & feel as when

answering calls

By default, when entering in this screen, an auto-start call is established automatically to the first external panel and

its video is displayed to the left while a set of controls is accessible to the right and bottom of the screen:

The controls at the right are the following:

•

Next:

Establish an auto-start call to the next external panel. If there is only one external panel, the icon is

disabled.

•

Previous:

Establish an auto-start call to the previous external panel. If there is only one external panel, the icon

is disabled.

•

Stop/Restart monitoring:

Stop/Restart a call. When a call is established, the

Stop

icon is displayed and when

the call is stopped, the

Restart

icon is displayed:

Summary of Contents for ELVOX 40610.S

































































































































Search results

Summary of Contents for ELVOX 40610.S

Reviews:

Brands by name

Popular brands

Vimar ELVOX 40610.S, User Manual

Search results

Summary of Contents for ELVOX 40610.S

Reviews:

Brands by name

Popular brands