14
Thermostat
Communication objects and ETS parameters
Reference ETS parameters
General
General parameters
ETS text
Values available
Comment
[
Default value
]
Displayed Value
0 = View Current Tem-
perature
You can choose
whether to view on
the display: the tem-
perature measured,
the fan coil speed
and the valve status,
no information, the
temperature delta
compared to the
Setpoint set by the
project
1 = Current setpoint
2 = Display Off
3 = View Setpoint
Difference
[0]
Visibility of operating
modes
Yes
Possibility of disa-
bling the operating
mode setting button
on the display
No
[Yes]
Heating icon visible
Yes
Possibility of disa-
bling the heating icon
on the display
No
[Yes]
Cooling icon visible
Yes
Possibility of disabling
the air conditioning
icon on the display
No
[Yes]
Button Activation
0 = Enable
You can choose
whether to make the
thermostat buttons
operative
1 = Disable
[0]
Temperature units
0 = Celsius
Only for the display
1 = Fahrenheit
[0]
Enable Menu
0 = Disable
If enabled, the
thermostat operating
mode can be
changed. The Re-
duced menu lets you
locally change the
thermostat operating
modes only from
Comfort to Protected
and vice versa.
1 = Enable
2= Enable Reduced
[1]
Percentage displayed
0 = None
To view the humidity
on the display as a
percentage or a 2
Byte value.
1 = Humidity
2 = Percentage
[1]
CAUTION: If you use thermostats art. 02952 with firmware
version 1.00 do not use the setting:
Percentage displayed = Humidity.
General settings