Villager Villybot 2.0, Original Instruction Manual, Page: 49 / 272

18
→
If two passwords are equal, the change is successful. Otherwise, the status light flashes
(change failed).
Technical information
Light status
Light 1 st function 2 nd function
Status light Shows fault code in case of a problem
When changing the password: indicates
the first time to enter the password.
1D Recurring work cycle: 1 day
When changing the password: indicates
the second time to enter the password.
2D Recurring work cycle: 2 days
When entering the password: represents
the first digit of the password, if the first
digit is entered, the light is off.
2H Working time: 2 hours per day
When entering the password: represents
the second digit of the password, if the
second digit is entered, the light is off.
4H Working time: 4 hours per day
When entering the password: represents
the third digit of the password, if the third
digit is entered, the light is off.
6H Working time: 6 hours per day
When entering the password: represents
the fourth digit of the password, if the
fourth digit is entered, the light is off.
Buttons
Button 1 st function 2 nd function
Cycle Set the recurring work cycle
-
When entering the password: number
one (1)
-
When you delay setting the password -
extend time. When the system fault
indicator flashes, press this button to
delay the system password protection
for 60 sec and facilitate the observation
of the cause. (otherwise system pasword
protection activates in 20 sec)
-
When a problem with a specific code
occurs: show fault code.
Home Send the mower to the charging station When entering the password: number two (2)
Start Start the robotic mower
When entering the password: number three
(3)
Set Set the working time per day When entering the password: number four (4)