Villager Villybot 2.0, Original Instruction Manual, Page: 44 / 272

13
6. When the perimeter wire has been laid
around the entire cutting area, feed the end
of the perimeter wire through the tubing on
the charging station on the charging station,
until it appears on the other side.
Cut the wire and strip 10-15 mm of
insulation off.
7. Connect the wire to the right hand (black –
mark B) terminal of the charging station.
A Straight track in front of charging station 1.5 m minimum
B Distance perpendicular to charging station 1 m minimum
C Straight track in back side of charging station 1 m minimum
D Distance between two encircled objects 0.75 m minimum
E Distance between two parallel wires 0.05 m maximum
F Distance between perimeter and encircled object 0.75 m minimum
G Near flat path in level with lawn (run over)
0.05 m distance
H Narrow passage diameter 1 m minimum
I Near firm obstacle 0.3 m minimum
Fig. 11 – Connecting the
end of the wire
Fig. 12 – Encircling obstacles