7
© 2012 Viking Preferred Service
Operation
adjusting Controls (cont.)
If you need to adjust the temperature in either the
refrigerator or freezer compartment, use the settings
listed in the chart as a guide.
To adjust Set point Temperatures:
The first touch of the (+) or (-) touch pad displays the
current temperature set point.
• Press the (+) or (-) touch pads until the desired
temperature set point is displayed.
note:
Except when first turning on the refrigerator,
DO NOT adjust either temperature control more
than one setting at a time. Wait 24 hours between
adjustments for the temperature to stabilize.
Temperature adjustment Chart
Condition/Reason
Adjustment
Refrigerator too warm
Adjust REFRIGERATOR
Control 1° lower
Freezer too warm/too little
ice
Adjust FREEZER Control
1° lower
Refrigerator too cold
Adjust REFRIGERATOR
Control 1° higher
Freezer too cold
Adjust FREEZER Control
1° higher
additional Control Center Features
humidity Control
The Humidity Control feature turns on a heater to
help reduce moisture on the door hinge seal. Use in
humid environments or when you notice
moisture on the door hinge seal. The refrigerator
uses more energy when Humidity Control is on.
• Press Humidity Control when the
environment is warm and more
humid, or if you notice moisture on
the door hinge seal. The indicator
light will be lit when humidity
control is ON.
• Press Humidity Control again to
turn OFF and save energy when
the environment is less humid.
Sabbath Mode
The Sabbath Mode is designed for those whose
religious observances require turning off the lights
and dispensers.
ON - All interior lights and alarm tones will be
disabled.
OFF - All interior lights and alarm tones will be
enabled.
• Press and hold the Sabbath Mode
touch pad for 3 seconds or until
the indicator light is lit to turn on
this feature. Press and hold the
Sabbath Mode touch pad again to
turn off this feature.
Door alarm
The Door Alarm feature sounds a chime every few
seconds when the refrigerator door has been left
open for 5 continuous minutes. The chime will
sound until the door is closed or Door Alarm is
turned off.
• Press the Door Alarm to turn this
feature ON or OFF. The indicator light
will be lit when the Door Alarm feature
is on.
Max Cool
The Max Cool feature assists with periods of high
refrigerator use, full grocery loads, or temporarily
warm room temperatures.
• Press Max Cool to set the freezer and
refrigerator to the lowest temperature
settings. Press Max Cool again to
return to the normal refrigerator set
point.
note:
The Max Cool feature will automatically shut
off in approximately 12 hours.
Filter Reset
The Filter Reset control allows you to restart the
water filter status tracking feature each time you
replace your water filter. See “Water Filtration
System.”
• Press and hold the Filter Reset touch
pad for 3 seconds, until the Order
or Replace light turns off.
