background image

10

© 2012 Viking Preferred Service 

Operation

Cleaning (cont.)

To Clean your Refrigerator:

note: 

DO NOT use abrasive or harsh cleaners such 

as window sprays, scouring cleansers, flammable 

fluids, cleaning waxes, concentrated detergents, 

bleaches or cleansers containing petroleum products 

on plastic parts, interior and door liners or gaskets. 

DO NOT use paper towels, scouring pads, or other 

harsh cleaning tools.

1.   Unplug refrigerator or disconnect power.

2.    Hand wash, rinse, and dry removable parts and 

interior surfaces thoroughly. Use a clean sponge 

or soft cloth and a mild detergent in warm water.

3.   Wash stainless steel and painted metal exteriors 

with a clean sponge or soft cloth and a mild 

detergent in warm water.

4.    There is no need for routine condenser cleaning 

in normal home operating environments. If the 

environment is particularly greasy or dusty, 

or there is significant pet traffic in the home, 

the condenser should be cleaned every 2 to 3 

months to ensure maximum efficiency.

 

If you need to clean the condenser:

 

•  Remove the base grille.

 

•     Use a vacuum cleaner with a soft brush 

to clean the grille, the open areas behind 

the grille and the front surface area of the 

condenser.

 

•       Replace the base grille when finished.

5.   Plug in refrigerator or reconnect power.

Summary of Contents for RDDFF236



























































Reviews: