34
© 2012 Viking Preferred Service
Service Diagnostics and procedures–Disassembly
Water Dispenser
To access the water dispenser:
1. Insert a screwdriver blade and carefully remove
the top cover of the dispenser.
2. Disconnect water line from dispenser assembly.
3. Press tabs to release switch from side panel.
Disconnect wiring.
4. Replace or repair as necessary.
5. Reverse procedure to reinstall.
Water Dispenser
Water Line
Tabs
Screwdriver
Blade
WARNING
To avoid risk of electrical shock, personal injury, or death, disconnect electrical power to unit using power
switch before servicing. Wires removed during disassembly must be replaced on proper terminals to insure
correct earth ground and polarization. After servicing, reconnect power using power switch.
Wiring
