VCOP Gold User Manual
Vighnaharta Technologies Pvt. Ltd. Page
7
of
44
2.
Installation Procedure
2.1 Prerequisites
•
Telephone line must be available at user premises or user must have SIM card.
•
The convenient location for mounting the system must be finalized.
•
The wiring from sensors to the system is complete.
•
Number of sensors to be configured and its types must be finalized.
2.2 Installing the unit at the user premises
1.
Run all desired power, siren and hardware contact wires to the panel location.
2.
Open Enclosure door for wiring entry.
3.
Level the cabinet on sturdy wall and mark the mounting holes with a pencil.
Note:
The height of the unit from the flooring must be appropriate so that user can easily
view the indications on the front panel.
4.
Insert the screws into the top mounting holes partially and hang the cabinet on screws.
5.
Tight all the screws of the cabinet and check the fitments.
6.
Put SIM card inside PCB for VCOP Gold GSM model, Connect Landline cable to the PSTN PCB
for VCOP Gold PSTN Model.
Note
: According the product requirement and application make the proper connection.
7.
Connect sensor cables to the connector.
8.
Do the configuration for zones as mentioned in zone Configuration section.
