VCOP Gold User Manual
Vighnaharta Technologies Pvt. Ltd. Page
37
of
44
8.
IP Setting
Factory Default Ethernet module Settings:
The factory default IP address of panel is 192.100.100.2 or 192.168.100.1
1.
Connect the Panel to your
LAPTOP/PC
direct through LAN
cable. 2. Set your laptop IP address as – 192.100.100.10 or
192.168.100.5 3. Subnet Mask - 255.255.255.0
4. Gateway - blank
5. Open the web browser & goto
http://192.100.100.2
or 192.168.100.1
The below webpage will open. Set local IP & remote IP setting as per site condition.
MAC Address:
A media access control address (MAC address), also called physical
address, is a unique identifier assigned to network interfaces for communications
on the physical network segment. Note: Do not change this field.
Local IP:
It’s Panel IP Address.
Local Port:
Its Panel port number which is used for communication.
Gateway:
A GATEWAY is a network point that acts as an entrance to another
network.
Subnet mask:
A subnet mask is a screen of numbers used for routing
traffic within a subnet 255.255.255.0
Remote IP:
Its CMS server IP address. Panel will send all alerts to this IP Address.
Remote Port:
This is the communication port of CMS Server.
Timeout in sec:
its connection timeout with server. It must be set 10 sec.
For e.g.
CMS Server IP address is
219.64.202.224
& port is
5000.
Vighnaharta Technologies Pvt. Ltd.
Survey No. 11/11, 2
nd
Floor,
Karanjkar Estate, Nanded Gaon,
Pune 411041
