VCOP Gold User Manual
Vighnaharta Technologies Pvt. Ltd. Page
13
of
44
4. CONFIGURING THE SYSTEM
There are two types of users of the unit. The different configurations are available to these users.
After power on, press
MENU 1
key, the LCD displays as shown below.
To select the
Config
menu, press
MENU 3
key.
As this the configuration menu it is password protected, so user have to enter the password, the
system will
“PIN REQUIRED
“as a stand by message on first line, “
ENTER PIN: xxxx
” on second
line and appears as shown below.
If user is installer, user has to enter password for installer. The LCD appears as shown below.
This menu is categorizes as Installer and User (from 1 to 4). Installer has administrative rights.
Installer can assign and change the pins of the user. When user enters a pin, according to
category, the menus are available.
Note
: Menus for the installer are not available to users from 1 to 4.
4.1
INSTALLER
To select
Config
menu, press
MENU 3
key. Enter the pin of the installer. The LCD displays as
shown below.
Press
MENU 1
key. The LCD displays as shown below.
4.1.1 Set PIN
Installer can set PIN for installer, other users and duress.
Press
MENU 1
key. The LCD displays as shown below.
SELECT OPTIONS:
Installer User
Inst Config 1/1
Set PIN Del Log
SELECT OPTIONS:
Inst User Dures
SELECT OPTIONS:
Date Time Config
PIN REQUIRED
ENTER PIN: xxxx
SELECT OPTIONS:
Installer User
