VCOP Gold User Manual
Vighnaharta Technologies Pvt. Ltd. Page
17
of
44
classified as interior
or perimeter type.
Interior means inside
the building.
Perimeter means
outside the building
but inside the
premises, typically in
the garden, near gate
or so on. Once any
zone triggers, system
gets alert. Then
system either starts
giving alarm
immediately or after
some defined delay
depending up on the
zone trigger type.
3.
Interior instant
4.
Perimeter Instant
5.
Interior delay
To change the type use forward (
>
) and
backward (
<
) arrow key.
By default, zones have assigned desired
trigger type. User can modify it. Press
Enter
key to save the trigger type assigned to the
zone.
Note:
When trigger type has delay, user can
disarm the system within defined delay time.
If no action is taken by the user, then system
starts alarm. In case of 24 Hrs, system gives
alert for tripped zone all the time, no delay is
provided.
Zone type
This is type of the
wired or wireless
zone. This parameter
indicates the sensor
type.
For e.g.
At
zone 1 smoke sensor
is connected, select
this parameter a fire,
if motion sensor
connected select it as
a Motion & so, on. To
change the type use
forward (
>
) and
backward (
<
) arrow
key.
There are 10 zone types.
1.
Intrusion
2.
Fire
3.
Motion
4.
Gas Leak
5.
Tamper
6.
Panic
7.
Supervision
8.
Vibration
9.
Heat
10.
Other
By default, zones have assigned desired zone
type. User can modify it. Press
Enter
key to
save the zone type assigned to the zone.
Note:
User can use more than one zone with
same zone type. For example, Zone 1, 5 and
8 can have zone type as Intrusion. Zone 6
and 7 can have zone type as Motion.
Siren Active/
bypass
This is to set the zone
siren as active or
bypass (silent) for
wired or wireless
zone.
To bypass the already active siren, press
MENU 1
key. To active the already bypassed
siren, press
MENU 1
key.
Note:
To save the all selected configuration
parameters press
Enter
key form this menu.
01:Edit ZoneType
Fire
01:Siren Active
Bypass?
