VCOP Gold User Manual
Vighnaharta Technologies Pvt. Ltd. Page
24
of
44
5.
Configuring GSM
Note
: This section only applicable when product is V-COP GOLD-GSM.
In case of emergency, the system reports alarm condition to configured numbers with the help of
GSM technology (Global System for Mobile communications).
VCOP reports using voice calls to landline or mobile numbers. It also reports pre-formatted text
messages using SMS to mobile numbers. User can configure up to 20 numbers (10 voice numbers
and 10 sms numbers). User can record voice message for 16 seconds in the desired language. This
message plays back when VCOP dials voice numbers for alarm reporting.
To select
Config
menu, press
MENU 3
key. Enter the pin for the desired user. Then LCD appears
as shown below.
To select GSM configuration, press
MENU 2
key. LCD appears as shown below.
Note
: GSM menu is shown if VCOP has GSM module installed.
To select
Voice
mode, press
MENU 1
key.
To select
SMS
mode, press
MENU 3
key.
To configure SMS authenticated numbers, Press
Enter
key to
SMS Config Nos
menu
To go for Comm Test Menu, press
Enter
key. The LCD appears as shown here.
5.1 Voice number configuration
The system allows configuring 10 voice numbers one after another. The number can be mobile or
landline number. The number not to be exceeded more than 15 digit including country code, and
start with country code (‘
91
’ for India). In case of landline number, country code is followed by for
example city code (‘
20
’ for Pune) and actual landline number.
For example,
Mobile: 919822333232
Landline: 912024339634
Enter Phone Nos.
Voice SMS
SELECT OPTIONS:
Date Time Config
SELECT OPTIONS:
System GSM
SMS Config Nos.
ESC
Edit
Comm Test:
Activate
