Page 16
STEP 1
Use a box cutter, a knife, or a sharp pair of scissors to cut the seals on top side of the carbon box.
STEP 2
Open the carbon box.
STEP 3
Lift the unit carefully out of the box.
STEP 4
Remove both polystyrene ends, one from each side.
STEP 5
Pull the safety plastic cover off the monitor screen.
STEP 6
Make sure all the components listed in the packing list are present.
Packing List
The VM series monitor is shipped with the following standard components:
Quantity
Description and Part Number
Image
1
VM032, VM042(H) or VM047
Series System
(Part number: )
1
Remote controller (Optional)
(Part number: )
1
Power cord
(Part number: )
1
Wireless LAN antenna (Optional)
(Part number: )
1
Operation manual
(Part number: )
1
Windows™ XP Professional CD
(Part number: )
1
Driver CD
(Part number: )
1
Wall mount
(Part number: )
1
Screw set
(Part number: )
Mounting Space Requirements
To prevent internal heat buildup from sealing off the display, make sure to ensure proper ventilation by
leaving open the minimum amount of space around the display as illustrated below.
The ambient temperature must be 0
°
C to 35
°
C (32
°
F to 95
°
F).
When installing the display horizontally, use the optional display stand (not supplied).
Installation of hardware such as brackets, screws, or bolts is not specified and is up to the authorized local
dealers. Consult with qualified personnel for installation.
While the display is on, a certain amount of heat builds up inside. This can cause burns. Avoid touching the
top or rear of the unit when it is powered on or just after it has entered standby mode.
