Page 35
Rear Panel Removal
To remove the rear panel, follow the following steps.
Step 1
Unscrew the wireless LAN antenna located on the
rear panel.
Step 2
Remove 2 thumb screws holding the connector panel
cover.
Step 3
Using a Philips screwdriver, unscrew the 12 screws
holding the large rear panel as shown in the drawing
on the left.
NOTE
Be sure to remove any wall mount before proceeding
with the removal of the rear panel.
The following components are accessible once the
large rear panel (
[
) has been removed.
Mainboard
Hard disk drive
SMPS
PC
power
supply
NOTE
Be sure to lay the unit flat facing the floor before removing the rear panel. (The mainboard access panel will be
attached to the rear panel when it is removed.)
Rear panel
Z
Hard disk drive
AD board
Mainboard
SMPS
PC Power Supply
Wireless LAN antenna
(Antenna not shown)
