Page 48
[On]
Always leaves the computer in the power on state.
[Last State]
Restores the system to the status before power failure or interrupt
occurred.
Wakeup Event Setup
Press <Enter> and the following sub-menu appears:
Resume From S3 By USB Device
This item allows the activity of the USB device to wake up the system from S3 (Suspend to RAM) sleep
state.
Resume From S3 By PS/2 Keyboard
This setting determines whether the system will be awakened from what power saving modes when input
signal of the PS/2 keyboard is detected.
Keyboard Power On Function
This item allows you to specify a key from the keyboard to power on the system.
Resume From S3 By PS/2 Mouse
This setting determines whether the system will be awakened from what power saving modes when input
signal of the PS/2 mouse is detected.
Resume By PCI Device (PME#)
When set to [Enabled], the feature allows your system to be awakened from the power saving modes
through any event on PME (Power Management Event).
Resume By PCI-E Device
When set to [Enabled], the feature allows your system to be awakened from the power saving modes
through any event on PCI-E device.
Resume By RTC Alarm
This field is used to enable or disable the feature of booting up the system on a scheduled time/date.
