27
4.
to confirm
Time program
Further information can be found in chapter
"Terminology" in the appendix.
Setting a time program
Factory setting:
One
time phase from 06:00 to 22:00 h
for every day of the week
1. "Heating circuit 1
"
in the header to select the
required heating circuit
2.
for
"Time program"
3.
Select day of the week.
4.
5.
Depending on the required change, tap the follow-
ing buttons:
to change the time phase
for a new time phase
to delete a time phase
to select the time phase if more than one
time phase is set.
6.
To continue, see page 17.
Note
When adjusting the setting, bear in mind that your
micro CHP system requires some time to heat the
rooms to the required temperature.
Heating curve
Further information can be found in chapter
"Terminology" in the appendix.
Setting a heating curve
Factory setting:
■
"Slope"
: 1.4
■
"Level"
: 0
Tap the following on-screen buttons:
1.
2. "Heating"
3. "Heating circuit 1"
for heating circuit selection
4. "Heating curve"
5.
/ for the required value for
"Slope"
or
"Level"
6.
to confirm
Fig. 10
The graph clearly shows the change in the heating
curve as soon as you alter the value for the slope or
level.
Central heating
Switching central heating ON or OFF (operating…
(cont.)
5835784
Summary of Contents for Vitovalor PT2
Page 55: ...55 5835784...
