31
Assembly and sealing faces to note
1.
With the pipe outlets, ensure dia-
phragm grommets
A
are seated
correctly.
Seal diaphragm grommets
A
with
adhesive tape if necessary.
2.
Fit the cylinder module in reverse
order to that described on page 25.
!
Please note
Make tight hydraulic connec-
tions between the heat pump
module and cylinder module.
With pipe outlets, ensure lock-
ing tabs
C
are seated cor-
rectly (see following illustra-
tion).
!
Please note
Seal the appliance so it is
soundproof and diffusion-
proof.
Sealing tape on the side pan-
els must be in close contact
with sealing faces
B
on the
casing (see following illustra-
tion).
Installation sequence
Installing the internal unit
(cont.)
5600 950 GB
Installation
