Viessmann SCU224 User Manual Download Page 37

Page: 37 / 52

Viessmann

5443203

SCU224

Indication of collector temperatures

Indicates the current collector temperature.

•

COL : collector temperature (1-collector system)

•

COL1 : collector temperature 1

•

COL2 : collector temperature 2

COL, COL1, COL2:

Collector temperature
Display range: -40 ... +500 °F

[-40 ... +260 °C]

Indication of tank temperatures

Indicates the current tank temperature.

•

TST :

tank temperature (1-tank system)

•

TSTB :

tank temperature bottom

•

TSTT :

tank temperature top

(Arr = 3 and 4 only)

•

TST1 :

temperature tank 1 (2-tank-systems)

•

TST2 :

temperature tank 2 (2-tank-systems)

•

TDIS :

thermal disinfection temperature

(Arr = 3 only; replaces TSTT if, during thermal disin-
fection, the heating period DDIS is active)

TST, TSTB, TSTT,
TST1, TST2, TDIS:

Tank temperatures
Display range: -40 ... +500 °F

[-40 ... +260 °C]

Indication of sensors 3 and 4

Indicates the current temperature of the corresponding
additional sensor (without control function).

•

: temperature sensor 3

•

: temperature sensor 4

S3, S4:

Sensor temperatures
Display range: -40 ... +500 °F

[-40 ... +260 °C]

Indication of other temperatures

Indicates the current temperature of the corresponding
sensor.

•

TSFB : temperature solid fuel boiler

•

TRET : temperature heating return preheating

•

TR : temperature return

TSFB, TRET, TR:

Other mea sured tempe ratures
Display range: -40 ... +500 °F

[-40 ... +260 °C]

Note:

S3 and S4 will only be indicated if the temperature
sensors are connected.

Initialization

Indicates the time adjusted in

tDTO

, running backwards.

INIT:

ODB initialization active

Filling time

Indicates the time adjusted in

tFLL

, running backwards.

FLL:

ODB filling time active

Stabilization

Indicates the time adjusted in

tSTB

, running backwards.

STAB:

Stabilization

4.1 Display channels

Note:

The displayed values and adjustment channels

depend on which system layout, which options

and functions have been selected. Only values

and adjustment channels available for the indivi-

dual settings selected will appear in the menu.

Indication of drainback time periods

4. Channel overview

Summary of Contents for SCU224





















































Search results

Summary of Contents for SCU224

Reviews:

Viessmann SCU224, User Manual, Page: 37 / 52

Search results

Summary of Contents for SCU224

Reviews: