After correct password is entered by using numeric keys on
front panel or remote controllers, then
the recording of the unit is manually started. This can be actively confirmed by observing
the “REC” indication on screen.
If the operator need to stop recording, the “REC” button should be pressed again, then the prompt
for system password will appear again as follows:
On entering correct system password, the recording will be stopped which is actively verified by the
disappear of the “REC” indication on screen.
5
．
Playback operation
Use “Play” button to start playback.
Switch between “single channel playback” and “quad playback” by pressing “CH SEL”
button. Repeatedly pressing the “CH SEL” button will toggle the playback between
individual camera on single channel mode and then quad playback, in circular style.
During playback, if both audio inputs are activated, then “Audio” button can be press to toggle
between the two audio channels.
The playback is in circular style. In other word, on finishing of a file, the next file will be played,
and on finishing of the last file, the first file will be played. The playback will be circular and
continuous until the “Stop” button is pressed.
The buttons “
”
◀◀
.” ”
▶▶
.
II
and “
■
” are only available during playback
Fast Forward key is used to switch between x2, x4, x8 and x16 playback mode.
Reward key is used to switch between x1, x2, x4, x8 and x16 playback mode.
“Pause” key can be used to temporarily stop the playback and freeze the screen on the latest
frame. ”
After “Pause” is pressed, pressing the fast forward key will switch the playback between x1/2, x1/4
and x1/8 slow motion forward playback modes.
LIVE
REC
Enter Password
：
__ __ __ __
31
