1.3-1Sensor Type
Under this item, the screen prompt is as follows:
Use up and down keys to highlight individual alarm input, and use left or right keys to select the type of
alarm input. Type of Sensor input, can be NO (normally open) or NC (normally close).
1.3-2Alarm Management Setting
Under this item, the screen prompt is as follows:
Motion detection for camera 1, 2, 3 and 4 is M1, M2, M3 and M4 respectively. Sensor input 1, 2, 3 and
4 is S1, S2, S3 and S4 respectively. Highlight individual square to associated various M or S to
individual alarm output, and press “Enter” to confirm.
After selecting the management, final confirm by highlighting the “SET” and press “Enter”.
1.3-3Alarm output Setting
Under this window, the screen prompt is as follows:
〔
Sensor type
〕
* Sensor 1 NC
〔
NO
〕
* Sensor 2 NC
〔
NO
〕
* Sensor 3 NC
〔
NO
〕
* Sensor 4 NC
〔
NO
〕
〔
Alarm Management
〕
M1 M2 M3 M4 S1 S2 S3 S4
Alarm1
ㅁ
ㅁ
ㅁ
ㅁ
ㅁ
ㅁ
ㅁ
ㅁ
Alarm2
ㅁ
ㅁ
ㅁ
ㅁ
ㅁ
ㅁ
ㅁ
ㅁ
Alarm3
ㅁ
ㅁ
ㅁ
ㅁ
ㅁ
ㅁ
ㅁ
ㅁ
Alarm4
ㅁ
ㅁ
ㅁ
ㅁ
ㅁ
ㅁ
ㅁ
ㅁ
SET
〔
Alarm Output
〕
# 1 ON
〔
OFF
〕
# 2 ON
〔
OFF
〕
# 3 ON
〔
OFF
〕
# 4 ON
〔
OFF
〕
25
