1.3Repeat Recording
Under this “Repeat Record” item, the screen prompt is as follows:
If the “Repeat Record” is activated, then the on-line hard disk space will be acting as an FIFO (First In
First Out) buffer, old images will be erased automatically. No operator intervention will be required on
hard disk being full.
In contrast, if the “repeat Record” is not activated, then operator will be prompted on hard disk being
full, no old image will be erased. If the hard disk is full, and no proper operator action is being taken,
then all types of recording will be stopped until there is hard disk space for new recording.
Operator can highlight the desired option, and press “Enter” to confirm.
☞
Default Setup by factory “ON”
1.4Recording Speed (Frame Rate)
Under this “Frame Rate” item, the screen prompt is as follows:
Operator can select one of the several types of frame rate, and press “Enter” to confirm.
Caution: All alarm triggered recording is at maximum <30(25) fps> frame rate, this manual frame
rate setting is only applicable on scheduled recording.
1.5 Compression Rate (Recording Quality)
Under this “Recording Quality” item, the screen prompt is as follows:
〔
Repeat Record
〕
ON
OFF
〔
Frame Rate
〕
30(25.0) fps
15(12.5) fps
10(8.3) fps
6(5) fps
3(2.5) fps
1(1.0) fps
20
