PlasmaView VHD Service Remote Control
A-2
Vidikron PlasmaView VP-6000 VHD Owner’s Operating Manual
1.
ASPECT RATIO
Press this button repeatedly to select a display aspect ratio (this may be necessary with
certain computer resolutions).
2.
Input Selection Buttons:
RGB-HD
Selects INPUT 1 (ANALOG RGB IN) on the PlasmaView VHD.
DVI-D
Selects INPUT 2 (DIGITAL RGB) on the PlasmaView VHD.
3.
MENU
Pressing the
MENU
button brings up the main menu. Also, if you are in an adjustment
mode or function, pressing
MENU
brings the menu back one level.
4.
Directional Buttons (
/
/
/
)
Use these buttons to navigate the OSD menus and adjust various settings.
5.
SET BUTTON
When an item is highlighted on the On-Screen Display, the
SET
button selects the item.
6.
MUTE
Not used with the PlasmaView VHD.
7.
RGB SETUP
When using INPUT 1 to display images from a computer, press this button to
automatically set the Position, Clock and Phase settings to their optimum values.
8.
STANDBY/ON (
)
Press to put the display into operation or standby mode.
9.
INFO
Displays currently-selected input, aspect ratio and signal timing information.
10.
INSTALLER ADJUST (pin hole)
Used to access the INSTALLER ADJUST menu.
11.
MAGNIFY
Press this button to select and enlarge one part of the screen image.
12.
/ -
Not used with the PlasmaView VHD.
