Controls and Functions
Vidikron PlasmaView VP-6000 VHD Owner’s Operating Manual
13
PRE
L
IMINAR
Y
Input Selection Buttons:
Use these buttons to select an input source directly or to enter
numeric characters, as follows.
12.
VIDEO (1)
Press to select Composite video input as the source.
13.
S-VID 1 (2)/ S-VID 2 (5) (S-Video)
Press to select an S-Video input.
14.
COMP (Component) (3)
Press to select Component SD (480i/576i) video input as the source.
15.
HD 1 (4) / HD 2 (7)
Press to select a HD (RGBHV or YPbPr component) input.
16.
DVI 1 (6) / DVI 2 (8)
Press to select a Digital Video input.
Aspect Ratio Selection Buttons:
Use these buttons to select an aspect ratio directly or to
enter numeric characters, as follows.
17.
ANA (16:9) (9)
For viewing 16:9 DVDs or HDTV programs in their native aspect ratio.
18.
4X3 (4:3) (0)
Scales the input signal to fit 4:3 display mode in the center of the screen.
19.
LETBOX (Letterbox)
For viewing LaserDisc movies or non-anamorphic DVDs on a 4:3 screen.
20.
I-WIDE (IntelliWide)
Enlarges a 4:3 image horizontally in a NON-linear fashion to fit 16:9 full screen display.
21.
CINEMA
For viewing 2.35:1 source material.
22.
SVC
Not used.
