Operation
30
Vidikron PlasmaView VP-6000 VHD Owner’s Operating Manual
PRE
L
IMINAR
Y
4.2
Selecting the Input Source
By default, the PlasmaView VHD is configured to display the signal received on its RGBHV
(
ANALOG RGB IN
) input. To use the DVI-D (
DIGITAL RGB
) input instead:
1.
Press
MENU
and enter the Service Menu passcode.
2.
Select
Service
from the Main Menu.
3.
Select
Display Device
from the Service Menu.
4.
Press
to select DVI/HDMI, then press
ENTER
.
4.3
Setting the Computer
Display Properties
To maximize image quality when using the PlasmaView VHD with a personal computer, you
may need to adjust the display properties of your computer’s video card. To do this on a
Microsoft® Windows®-based PC:
1.
Choose Settings from the Windows Start
Menu and click on “Control Panel.”
2.
Double click on the
Display
icon.
3.
Click the
Settings
tab on the display dialog
box.
4.
Adjust the resolution to 1024x768 pixels.
You must enter a passcode to access the Service menu.
Note