V-Tap ISDN BRI Manual EN v2.6 Dec 2018 © 2017-2018 Vidicode 27
Extra SD card settings
".CS"
= Show all current SD file-counters in the App Special Flags.
Note: The Read file-counter on 0 will resend all files again!
".CR<numb>" = Set SD card Read file-counter from 0 till 32767.
".CW<numb>" = Set SD card Write file-counter from 0 till 32767.
".CD<numb>" = Set SD card Delete file-counter from 0 till 32767.
Debug settings
".D"
= Debug mode enabled. Output to serial port only.
".D<time>"
= Debug enabled and update set per 10ms (default 1 sec).
".D.T"
= Open Debug Trace file. The file TRACE.TXT is closed again
after web login. Then ".D.T" must be removed from the
App Special Flags and the settings must be saved.
Then TRACE.TXT can be downloaded with ftp.
".DT"
= Open D-channel Trace file. The file DTEST.TXT is closed again
after web login. Then ".DT" must be removed from the App
Special Flags and the settings must be saved.
Then DTEST.TXT can be downloaded with ftp.
Recording is not possible during the D-channel trace!
3.3.13
Licenses & Versions
Licenses: Apresa / PC / S&U
The Channel Licenses for Apresa and PC and the Support & Update
end-date are shown here. A Channel License is the right to upload a
recorded call via the Tunnel to the Tunnel server. At least 1 Channel
License is needed before the system starts recording the calls.
Adding new licenses is further described in the separate quick guide
about V-Taps and Licenses.
V-Tap ISDN BRI OS Version
V-Tap ISDN BRI App Version
V-Tap ISDN BRI Serial Number
Firmware versions and the serial number are shown for information
purposes only and cannot be changed.
