Vidicode V-Tap ISDN BRI Manual Download Page 26 | Manualshive

Page: 26 / 39

background image

V-Tap ISDN BRI Manual EN v2.6 Dec 2018 © 2017-2018 Vidicode 26

3.3.12

App Special Flags

App Special Flags

This parameter represents a mixture of internal options and/or
commands. When filled in as a numeric value, the used bits are all
on/off switches as shown below.
The result of the sum of the used bits must be entered as a decimal
number. For example, setting both bit3 and bit12 results in the value
8+4096 = 4104.

bit0   (+1)       :  Disable Auto Delete function when SD card is almost full.
bit1   (+2)       :  Enable SD Power Save Mode (slow clock during idle time).
bit2   (+4)       :  Disable initializing the IP-stack instead of Tunnel Close.
bit3   (+8)       :  unused
bit4   (+16)     :  Force Half Duplex on all LAN ports.
bit5   (+32)     :  Force 10 Mbps on all LAN ports.
bit6   (+64)     :  Set time as Daylight Saving Time.
bit7   (+128)   :  Disable Daylight Saving Time Correction in the NTP function.
bit8   (+256)   :  Enable CPU Overclocking (10 % faster).
bit9   (+512)   :  Disable CPU Cash Controller (20 % slower).

bit10 (+1024) :  CPU running on overclocking (5% faster).
bit11 (+2048) :  Disable USB function, so no HID recognition (saves power).
bit12 (+4096) :  Disable USB sleep function 10 minutes after start-up.

The App Special Flags field can also be used to enter commands for extra
settings and features (most of them are preceded by a dot):

"FACTORY"               = Factory settings. The IP address is back on 192.168.55.66.
"FACTORY WIFI"       = Factory settings AND enable Wi-Fi module & settings.
"FACTORY NOWIFI" = Factory settings AND disable Wi-Fi module & settings.

".LAN"

= Start with LAN cable and fallback to Wi-Fi connection.

".WF"

= Disable Fallback from Wi-Fi to LAN cable.

".WC<numb>"   = Set Wi-Fi Channel ID; 1 till 13.
".WR<numb>"   = Set Wi-Fi RF TX Power; 0 till 82 per 0.25 dBm.
".WD"

= Set the DNS server for Wi-Fi the same as the LAN cable.

".WN"

= Disable NTP from Wi-Fi.

".WI<ip>"

= Set IP address for web server access, default 192.168.55.66

".WH"

= Set DHCP range <ip>1 till <ip>9 when using .WI.

".WK<numb>" = Keep-alive timer in seconds for Wi-Fi Tunnel connection.
".WL"

= Disable web Login page after Wi-Fi connection.

".WT<numb>" = Set Timeout in seconds for the TCP web server; default 90.
".WUP"

= Update Wi-Fi module (version returned in App Special Flags).

".WZ0/1"

= Disable/Enable Wi-Fi module during recording.

«
...
24
25
26
27
28
...
»

Summary of Contents for V-Tap ISDN BRI








































Reviews:

No comments

Related manuals for V-Tap ISDN BRI

Brand: PAT Pages: 55

Brand: PAT Pages: 31

Brand: Kane Pages: 19

Brand: Veeder-Root Pages: 39

Brand: Veeder-Root Pages: 98

Brand: VECTECH Pages: 9

Brand: A&D Pages: 39

Veeder-Root 7990 Series

Brand: Danaher Pages: 8

Brand: Fluke Calibration Pages: 13

Brand: Gates Pages: 112

Brand: kruss Pages: 115

Brand: JUMO Pages: 150

Brand: AKCP Pages: 16

Brand: Swann Pages: 106

Brand: Major tech Pages: 20

AcuRev 1310 Series

Brand: AccuEnergy Pages: 109

Brand: Vector Pages: 8

PowerMaster MTA15Z

Brand: PowerMetrix Pages: 13

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands