Videotec sm328a, Operating Instructions Manual, Page: 51 / 344

6. In this phase, setup installs the program on the user's computer, a process that can be interrupted at
any time by clicking the "Delete" button.
7. The work is completed. If selected, the option called “Launch Matrix328Setup”, enables the launch of
the configuration program as soon as installation is completed (the option is selected by default).
Finally, the installation procedure ends when the "Finish" key is pressed.
8.2.3 Software guide
8.2.3.1 Password setting
An access password can be set when the program is started up. The password does not exist when the
program is installed. To modify or input the password, it is necessary to select menu option
"Preferences>Password":
•
8. Configuration software Page 47/66 MNVCSM328A_1511_EN
figure 9: password window
figure 8: step 7
Select this option to
launch the program
automatically at the
end of the installation