Videotec SM164A, Operating Instructions Manual

Page: 28 / 184

Page 24 MNVCSM84A_1729_EN
5 On Screen Menu (OSM) Programming
The matrix is programmed using the video menu. When you exit programming, the matrix resets automatically
and, after the restart, the settings are stored even if the matrix is switched off.
5.1 Programming entering
If the matrix is controlled by keyboards DCTEL and DCBD press 6 on the remote keyboard.
If the matrix is controlled by keyboards DCJ and DCK press - on the remote keyboard.
5.2 Screens
Each screen shows which keys are valid at the time: usually, pressing a numeric key (shown in the menu as 1. /
2. / 3. etc.) will modify a parameter value or enter a submenu; pressing will return to the previous menu.
Other frequently used keys in the programming menu are
8
and
9
(increase and decrease a value),
and .
[MAIN MENU ]
[----------------------------]
[
]
[ 1.Language: ENGLISH ]
[ 2.System configuration ]
[ 3.Cycle Sequences
]
[ 4.Id Titles ]
[ 5.Alarms ]
[ 6.Passwords ]
[ 7.Video Mask ]
[ ]
[SEQ.End
]
Main menu
Change the language with
!
, or press
"
..
'
to enter a submenu.
save the configuration and reset the matrix.
[SYSTEM CONFIGURATION 2]
[----------------------------]
[ 1.Change Date: 2002/O6/03 ]
[ 2.Change Time: 14:19:59 ]
[ 3.Use Night Sequences: YES ]
[ 4.Start/End Day Sequences ]
[ 5.Set Week Days
]
[ 6.External triggers ]
[ 7.Coax Transm. / Aux Line ]
[ 8.Video
]
[ ]
[SEQ.End
]
System configuration submenu
Used to define system specifications.
Press
!
..
(
to enter a submenu, or to return to the main menu.
[CHANGE DATE 2.1]
[----------------------------]
[ Actual date: 2OO2/O6/03 ]
[ 1.Year : 2OO2
]
[ 2.Month: JUNE ]
[ 3.Day : 03, MONDAY ]
[ 4.Format : YYYY/MM/DD ]
[ 5.Visible : YES
]
[ 6.Position: UP/RIGHT ]
[ ]
[ ]
[SEQ.End
]
Data settings submenu
The current date is suggested; pressing ! .. # will allow the year, month
and day to be changed. Pressing
8
/
9
will then change the required
parameter value and pressing will confirm the change.
The data format can be European (day/month/year), American
(month/day/year) or ISO (year/month/day). Press
$
to select the desired
format.
Visibility and position can be changed by pressing % and & .
Press to return to the previous menu.