Victory BX510H Operator'S Manual Download | Manualshive

Page: 17 / 74

background image

Operator’s Manual Victory BX510H

- Page 17 of 74 -

Version 2.0

n

Specify and test an integral driveline shield with end cones that overlap but do not interfere
with the PTO master shield or implement an input connection shield.

n

Provide an input connection shield to interact with the integral driveline shield to guard the
shaft coupling and any torque limiting devices installed on the driveline.

n

Check that all routine maintenance of the driveline can be done without removing the shields.

Warnings and Instructions

Provide warnings and instructions for hazards associated with the machine. Provide instructions

for proper maintenance and repair.

n

Provide labels on the unit to advise the user of proper hitch dimensions and maximum safe
operating speed.

n

Check that proper danger labels are supplied with the driveline concerning these parameters
may be found in all driveline manufacturer’s catalogs.

n

Provide easy-to-understand instructions for proper driveline operation, maintenance, and
repair in the operator’s manual.

n

Advise against the use of PTO adapters which may defeat the purpose of the tractor’s master
shield and adversely affect the performance of the driveline.

n

Advise the user of locations of genuine original equipment spare parts.

You can obtain further information about driveline specifications and safety from your driveline

supplier and the following ASME standards and engineering practices:

n

S203

Rear power take-off for agricultural tractors.

n

S205

Power take-off definitions and terminology of farming tractors.

n

S207

Operating requirements for tractors and power take-off driven equipment implements.

n

S318

Safety for agricultural equipment.

n

S331

Implement power take-off driveline specifications.

n

S333

Agricultural tractor auxiliary power take-off drives.

n

S350

Safety alert symbol for agricultural equipment.

n

S441

Safety signs.

n

S493

Guarding for agricultural equipment.

n

EP363

Technical publications for agricultural equipment.

Other standards may apply to particular types of implements. All driveline manufacturers strive to

produce a safe product.
Like most other components, drivelines must be appropriately used, including proper tractor

master shields and implement input connection shields. Please contact us if you have any

questions about your driveline applications.

3.9

Not Allowed Use

It is not allowed to use the BX510H other than for woodchipper activities.

«
...
15
16
17
18
19
...
»

Summary of Contents for BX510H











































































Reviews:

No comments

Related manuals for BX510H

Nextreme NRC400

Brand: Laird Pages: 2

Brand: S&A Pages: 15

AquaStream2 CGAN 200

Brand: Trane Pages: 32

Brand: AEG Pages: 62

Brand: AEG Pages: 74

Brand: AEG Pages: 45

Brand: AEG Pages: 45

Brand: AEG Pages: 78

Brand: AEG Pages: 98

BearCat CH611DH

Brand: Echo Pages: 40

Martha Stewart MTS-EWC15

Brand: SNOWJOE Pages: 16

Brand: Clint Pages: 36

Brand: Hyundai power products Pages: 36

Brand: Andis Pages: 2

PRO-DIALOG PLUS 30RW

Brand: Carrier Pages: 36

GEMINI 09DPM035

Brand: Carrier Pages: 40

SUPER CLIPPER XTP

Brand: BaBylissMEN Pages: 12

LIMITEDFX B870GBA

Brand: BaBylissPro Pages: 6

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands