Operator’s Manual Victory BX510H
- Page 49 of 74 -
Version 2.0
STEP 9:
n
Rotate the flywheel by hand to ensure
that the four knives clear the bed
knife and that the proper distance
between the tip of each blade and the
bed knife is correct (.0300”).
n
If the distance is too close, damage to
the knives can occur by contacting the
bed knife.
n
Some material can pass through the
chipper without shearing if the
distance is too large. This can cause
the discharge chute to plug.
n
If you need to adjust the gap, refer to
bed knife changing/adjusting in this
Chapter: 8.5.2.
n
Rotate the flywheel by hand for two
or three revolutions to ensure no
interference issues.