Operator’s Manual Victory BX510H
- Page 42 of 74 -
Version 2.0
8
MAINTENANCE ADJUSTMENT AND REPAIR
This manual describes periodic maintenance that the owner can do. However, any care that
requires special tools or technical experience should be left to Victory authorized service
technicians.
Only qualified service personnel can carry out activities other than operating activities.
Maintenance tools are present in the Technical service department.
GENERAL WARNINGS FOR MAINTENANCE:
•
Always perform maintenance on a level and solid surface.
•
Only trained specialists with education and knowledge of the machine
and safety procedures are entitled to maintenance or service work.
•
Always strictly adhered to service intervals prescribed by the
manufacturer.
•
Always follow the maintenance schedule given in the Operator's manual
closely. Failure to do so may result in machine failure and costly repairs
or voided warranty.
•
Do not touch the fluid if you spot any leaking from hoses, pipes, or other
parts; it is dangerous and can lead to burns.
•
Provide adequate protection around moving or rotating parts, paying
attention to the risk of pinching.
•
Do not grease or oil the implement while it is in operation.
•
Only use genuine or equivalent parts.
•
Always use proper and good-quality tools.
•
Always prevent an accidental start; it can cause severe injury or death.
WARNINGS FOR HYDRAULIC DRIVEN SYSTEMS
•
Hydraulic fluid is hot when the machine has just come to a stop.
Allow the implement to cool down entirely before repairing the
hydraulic system.
•
Avoid contact with high-pressure fluid at all times. Liquid under high
pressure quickly penetrates clothing or skin, resulting in serious injuries.
•
Prevent oil leakage or spillage to avoid the risk of slipping.
•
Replace rubber and plastic hoses after six years with equivalent hoses.
•
It is strictly forbidden to make any changes to the hydraulic system or
use it for other purposes.
