79
Maintenance
Fuse Replacement
The standard fuse box is located under the seat.
This fuse box houses all standard service fuses
and the automatic circuit breakers. Fuse
application and size are provided on a label on
the fuse box cover.
The main vehicle fuse is located on the wiring
harness at the rear of the battery. Remove the
fuse cap to inspect or replace this fuse.
NOTICE:
Use fuses with the recommended
amperage to avoid damage to the
electrical system.
1. Remove the seat. See page 76.
2. Press the fuse box release tab inward and
slide the fuse box rearward to remove it
from the bracket. Use care to avoid pulling
or stretching the wires.
3. Bend the cover clips slightly away from the
cover to remove the cover.
Tip:
Use the fuse puller provided in the tool kit to
remove a fuse.
4. After replacing a fuse, reinstall the fuse box
cover.
5. Reinstall the fuse box to the bracket. Make
sure the release tab engages.
6. Reinstall the seat.
Spark Plugs
Your dealer can assist with spark plug inspections and replacement at the intervals
recommended in the periodic maintenance table. See page 54.
Spark Plug Specifications
Spark Plug Type
NGK MR7F
Spark Plug Gap
.030 inch (0.80 mm)
Spark Plug Torque
7.5 ft-lbs (10 Nm)
Main
Vehicle
Fuse
Cover Clip
Release Tab
