42
Pre-Ride Inspections
Throttle
1. With the engine OFF, rotate the throttle control grip fully open and then release it. It
should rotate smoothly from the rest position to the completely open position. It should
return to the rest position quickly when released.
2. Repeat the twist and release process with the handlebars turned fully right and fully left.
3. Service the throttle system if throttle operation is not smooth or if throttle grip does not
return properly. For more information, see the
VICTORY Service Manual.
Your
authorized VICTORY dealer can assist.
Mechanical Clutch
1. Squeeze the clutch lever toward the
handlebar and release it. It should move
freely and smoothly, and it should return
to the rest position quickly when released.
If the lever fails to perform as stated,
service the clutch lever before riding.
2. Freeplay (gap) is the amount of lever
movement from the rest position to the
point of cable resistance. Clutch lever
freeplay should be 0.5-1.5 mm. Measure
the gap between the clutch lever and the
lever housing. Adjust clutch lever
freeplay if necessary. See page 62.
Tip:
The starter interlock switch is dependent on the clutch lever freeplay being set correctly to ensure
activation of the clutch safety switch.
Steering
1. On level ground, straddle the motorcycle and bring it to the fully upright position. Turn
the handlebars from stop to stop. The action should be smooth but not loose.
2. Make sure wires, hoses and control cables do not interfere with smooth steering.
Clutch
Lever
.02-.059 in.
(0.5-1.5 mm) Freeplay
