25
Component Identification
Switches
Engine Stop/Run Switch
Use the engine stop/run switch to turn the engine off quickly. Turn the key off after the
engine stops.
• Press the top of the switch (STOP) to interrupt the
circuits and stop the engine. The engine should
not start or run when the switch is in the STOP
position.
• Press the bottom of the switch (RUN) to complete
the circuits and allow the engine to start and run.
Tip:
The headlights and any accessories plugged into
power ports will remain on until the ignition key is
turned off.
Starter Switch
Read the engine starting procedures before starting
the engine. See page 47.
The engine stop/run switch
must be in the RUN position and the transmission
must be in neutral, or the clutch must be disengaged.
Press and release the starter switch to start the engine.
High Beam/Low Beam Light Switch
Press the upper portion of the switch to activate the
high beam. Press the lower portion of the switch to
activate the low beam.
Horn Switch
To sound the horn, press the horn switch.
Engine Stop/Run
Switch
Engine Starter
Switch
High/Low Beam
Switch
Horn Switch
