30
Instruments, Features and Controls
Instrument Cluster
Multi-Function Display
Clock
Tip:
The clock must be reset any time the battery has been disconnected or discharged.
1. Turn the key to the ON position. Use the mode button to toggle to the odometer display.
2. Press and
hold
the mode button until the hour segment flashes. Release the button.
3. With the segment flashing, tap the mode button to advance to the desired setting.
4. Press and
hold
the mode button until the next segment flashes. Release the button.
5. Repeat steps 3-4 twice to set the 10-minute and 1-minute segments. After completing the
1-minute segment, step 4 will save the new settings and exit the clock mode.
Display Units (Standard/Metric)
The display can be changed to display either standard or metric units of measurement.
Tip:
To exit the set-up mode at any time, wait 10 seconds.The display automatically exits and returns to
the odometer display.
1. Turn the ignition off. Wait 10 seconds.
2. Press and
hold
the mode button while turning the key to the ON or PARK position.
3. When the display flashes the distance setting, tap the mode button to advance to the
desired setting.
4. Press and
hold
the mode button to save the setting and advance to the next display
option.
5. Repeat the procedure to change remaining display settings.
Diagnostic Functionality
Certain conditions will cause the battery indicator to illuminate and an error message to
display in the screen. If this occurs, your authorized VICTORY dealer can assist.
Standard Display
Metric Display
Distance
Miles
Kilometers
Temperature
Fahrenheit
Celsius
Time
12-Hour Clock
24-Hour Clock
Message
Location
Indicates
LO
DC Voltage Screen
Voltage remains below 11.0 volts for more than 10 seconds
OV
DC Voltage Screen
Voltage remains above 15.0 volts for more than 10 seconds
ERROR
All
Checksum error (gauge malfunction)
