44
Operation
The operation section describes how to operate your VICTORY motorcycle to ensure the
best performance and longevity of the engine and other components. Information includes:
Even if you’re an experienced motorcycle operator or passenger, read all of the safety
information in this manual before operating the motorcycle.
Engine Break-in Period
The engine break-in period for your motorcycle is the first 500 miles (800 km) of operation.
During this break-in period, critical engine parts require special wear-in procedures so they
seat and mate properly. Read, understand and follow all break-in procedures to ensure the
long-term performance and durability of your engine.
NOTICE:
Failure to properly follow the engine break-in procedures outlined in this manual can result
in serious damage to the engine. Follow all break-in procedures carefully. Avoid full throttle
operation and other conditions that may place an excessive load on the engine during the
break-in period.
The more cautiously you treat your motorcycle during the break-in period, the more satisfied
you will be with its performance later on. Overloading the engine at low RPM and/or
running the engine prematurely at high RPM may result in damage to the pistons and/or
other engine components.
Observe the following precautions during the break-in period:
• Upon initial start-up, do not allow the engine to idle for long periods as overheating can
occur.
• Avoid fast starts with wide open throttle. Drive slowly until the engine warms up.
• Avoid running the engine at extremely low RPM in higher gears (lugging the engine).
• Drive within the recommended operating speeds and gears. See page 45.
• Engine Break-in Period
• Fueling
• Starting the Engine
• Shifting Gears
• Accelerating
• Braking
• Stopping the Engine
• Parking
