76
Maintenance
Seat Removal/Installation
1. Remove the seat retaining bolt at the front
of the seat. The multi-tool can be used to
remove the seat bolt (located behind the
license plate bracket).
NOTICE:
Use caution to avoid contact with the
fuel tank when removing or installing the
seat.
2. Push the seat slightly forward (1) toward
the fuel tank to disengage the seat
retaining tab from the slot in the rear
frame. The bracket at the front of the seat
will slide under the rubber filler located
between the seat and the tank.
3. Lift the rear of the seat slightly (2) and
pull the seat rearward and upward (3) to
remove.
4. Reverse the procedure to reinstall the
seat.
WARNING!
If the seat retaining tab is not installed
into the slot, the rear of the seat will move from
side to side. Make sure the retaining tab is
engaged properly before operating.
Seat Mounting Bracket
Seat Bolt
Retaining Tab
2
3
1
